Skip to main content

SERIES 60 FAN BELTS ARE INCORRECTLY ADJUSTED

To determine if misadjusted fan belts are causing high engine coolant temperature, perform the following: ‪

  1. Test fan belt(s) tension; refer to section .
  2. Compare tension to belt specifications listed in Table .
    1. If the belt(s) tension is within specification, check the thermo-modulated fan; refer to section .
    2. If the belt(s) tension is not within specification,refer to section .
    3. Single Belt, lb (N)

      2 or 3 Belts, lb (N)

      80 - 100 (335 - 345) ‪

      60 - 80 (266 - 355) ‪

      Fan Belt Tension

Belt Tension Resolution

Perform the following steps to resolve incorrect belt tension: ‪

  1. Readjust belt(s) tension as necessary; refer to section .
  2. Verify belt tension resolution; refer to section .
Test Engine with Correct Belt Tension

Perform the following to determine if exterior radiator repair resolved high engine coolant temperature: ‪

  1. Start and run the engine.
  2. Run the engine through its operating range with no-load for approximately 5 minutes, allowing the engine coolant to reach normal operating range.
    1. If the engine coolant temperature is 88-96C (190-210F), no further troubleshooting is required. Shut down the engine.
    2. If the engine coolant temperature is not 88-96C (190-210F), shut down the engine. Check thermo-modulated fan; refer to section .