Skip to main content

SERIES 60 AERATED FUEL

To determine if aerated fuel is causing lack of power, perform the following steps: ‪

  1. Test for aerated fuel; refer to section .
  2. Visually check to see if air bubbles are rising to the surface of the fuel within the container.
    1. If air bubbles are not present, shut down engine, check for high fuel pressure; refer to section .
    2. If air bubbles are present, shut down engine; refer to section .

Aerated Fuel Resolution

Perform the following steps to resolve aerated fuel: ‪

  1. Perform aerated fuel repair; refer to section .
  2. Verify aerated fuel resolution; refer to section .
Test the Engine with Aerated Fuel Resolution

Perform the following steps to determine if aerated fuel resolution resolved lack of power condition: ‪

  1. Start and run the engine.
  2. Run the engine at idle with a no-load for approximately 5 minutes, allowing the engine coolant to reach normal operating range.
  3. Test drive the vehicle to ensure lack of power has been resolved.
    1. If no lack of power occurred during the test drive, no further troubleshooting is required. Shut down the engine.
    2. If lack of power occurred during the test drive, shut down the engine. Check for high fuel pressure; refer to section .