Skip to main content

SERIES 60 PLUGGED FUEL FILTER(S)

To determine if a plugged fuel filters is causing starting difficulty, perform the following steps: ‪

  1. Disconnect the fuel line return hose from the fitting located at the fuel tank.
  2. Place the opened end of fuel line into a five gallon container.
  3. Start the engine.
  4. Run the engine at 1000 r/min.
  5. Clock fuel rate for one minute.
  6. Measure the amount of fuel flowed into the container.
    1. If the fuel flow is greater than 1 gal/min (3.8 L/min), check for air in fuel; refer to section .
    2. If the fuel flow is less than 1 gal/min (3.8 L/min), replace the fuel filters; refer to section .

Plugged Fuel Filter(s) Replacement

Perform the following steps to replace fuel filter(s): ‪

  1. Replace the fuel filter; refer to section .
  2. Test the engine to determine if starting has been improved; refer to section .
Test Engine with Replaced Fuel Filters

Perform the following steps to determine if the replaced fuel filters resolved starting difficulty: ‪

  1. Refer to section for the exhaust caution before preceeding. Attempt to start and run the engine.
    1. If the engine starts and runs, no further troubleshooting is required. Shut down the engine.
    2. If the engine fails to start and run, check the fuel pump; refer to section .