HOME
SERIES 60
LUBRICATING OIL AND FILTER CHANGE INTERVALS FOR GENSET (WITH HIGH SULFUR FUELS)
SERIES 60 LUBRICATING OIL AND FILTER CHANGE INTERVALS FOR GENSET (WITH HIGH SULFUR FUELS)
The following must be maintained at various intervals.

NOTICE:
Operation with fuels having total sulfur greater than 32 ppm, on a mass basis, may result in engine damage, and is not recommended by Detroit Diesel Corporation.

150 hrs (or 3 months) Interval Maintenance (Standby Duty)
Every 150 hrs (or 3 months), the following must be replaced for a engine on standby:

Fuel with total sulfur greater than 24 ppm, but less than 32 ppm.

150 hrs (or 3 months) Interval Maintenance (Continuous/Prime Duty)
Every 150 hrs (or 3 months), the following must be replaced for a engine on continuous/prime:

Fuel with total sulfur greater than 24 ppm, but less than 32 ppm.

200 hrs (or 6 months) Interval Maintenance (Standby Duty)
Every 200 hrs (or 6 months), the following must be replaced for an engine on standby:

Fuel with total sulfur greater than 17 ppm, but less than 24 ppm.

200 hrs (or 3 months) Interval Maintenance (Continuous/Prime Duty)
Every 200 hrs (or 3 months), the following must be replaced for a continuous/prime running engine:

Fuel with total sulfur greater than 17 ppm, but less than 24 ppm.