Skip to main content

SERIES 60 MAINTENANCE OF SERIES 60 DIESEL ENGINES FOR GENERATOR SET

Series 60 diesel genset components must be maintained at various intervals. ‪

Daily Maintenance for Prime Diesel Genset

The following Prime genset components must be inspected daily: (Replace every 250 hours or three months, whichever comes first.) ‪

Note: Cranking motor, follow OEM recommendations.

Monthly Maintenance for Standby Diesel Genset

The following Standby genset components must be inspected monthly: (Replace every 150 hours or one year, whichever comes first.) ‪

Perform maintenance of lubricating oil, cooling system, fuel filters, water separator, and oil pressure at the time of Load Test. Load Test should be at least 35% of the unit's full rated output. Refer to generator set manufacturer's instructions. ‪

150 hrs (or 2 months) Interval Maintenance for Genset

Every 150 hrs (or 2 months) the following components must be inspected: ‪

300 hrs (or 4 months) Interval Maintenance for Genset

Every300 hrs (or 4 months) the following components must be inspected: ‪

600 hrs (or 8 months) Interval Maintenance for Genset

Every 600 hrs (or 83 months) the following components must be inspected: ‪

1000 hrs (or 13 months) Interval Maintenance for Genset

Every 1000 hrs (or 13 months) the following components must be inspected: ‪

1500 hrs (or 20 months) Interval Maintenance for Genset

Every 1500 hrs (or 20 months) the following components must be inspected: ‪

2000 hrs (or 26 months) Interval Maintenance for Genset

Every 2000 hrs (or 26 months) the following components must be replaced: ‪

Every 2000 hrs (or 26 months) the following components must be inspected: ‪

3000 hrs (or 39 months) Interval Maintenance for Genset

Every 3000 hrs (or 39 months) the following components must be inspected: ‪

4000 hrs (or 52 months) Interval Maintenance for Genset

Every 4000 hrs (or 52 months) the following components must be replaced: ‪