Skip to main content

SERIES 40E

ADDITIONAL INFORMATION

SPECIFICATIONS

Torque Values are listed in Table . ‪

Component

Torque

Injection Control Pressure Sensor (ICP)* ‪

35 Nm (26 lbft) ‪

Injection Pressure Regulator Valve ‪

56 Nm (41 lbft) ‪

Front And Rear Engine Mounted ECM: ‪

- ‪

Electronic Control Module (ECM) Connector Harness Retaining Screw ‪

4.5 Nm (40 lbin.) ‪

ECM Mounting Bolts ‪

15 Nm (20 lbft) ‪

ECM Mounting Bracket Mounting Bolts ‪

15 Nm (20 lbft) ‪

ECM Mounting Bracket Mounting Nuts ‪

15 Nm (20 lbft) ‪

Banjo Fuel Line Connections ‪

35 Nm (26 lbft) ‪

Fuel Filter Header Mounting Bolt ‪

18 Nm (13 lbft) ‪

Injector Hold Down Bolt ‪

13 Nm (120 lbin.) ‪

Fuel Return Valve Assembly ‪

35 Nm (26 lbft) ‪

Shoulder Injector Bolt ‪

13 Nm (120 lbin.) ‪

Torque Values

Note: * Apply Loctite #277 to threads prior to assembly.

Fuel System Specifications are listed in Table , and listed in Table . ‪

Fuel Return Valve

Value

Valve to unseat at: ‪

414 kPa (60 psi) ‪

Fuel Return Valve

Fuel Filter

Specifications

Type ‪

Spin-on and Fuel Strainer ‪

Fuel Filter

SERVICE TOOLS

Tools required for maintenance and repair are listed in Table . ‪

Description

Tool

Nozzle Tester with Adaptor ‪

J 29075-150

Nozzle Puller ‪

J 41165

Fuel Injector Sleeve Remover ‪

J 42945

Fuel Injector Removal Tool ‪

J 42946

Fuel Injector Sleeve Installer ‪

J 42947

Injector Test Harness ‪

J 43098

Service Tools